Home / Plumbing / Five Easy Steps on How to Remove a Toilet Quickly

Five Easy Steps on How to Remove a Toilet Quickly

Removing a toilet may seem like a challenging task, But it can be a straightforward DIY project with the right guidance. In this guide, we’ll walk you through five easy steps to help you remove a toilet quickly and efficiently. Whether you’re renovating your bathroom or need to replace a malfunctioning toilet, these steps will ensure you can complete the task with confidence. 

Remember to take necessary precautions and follow local regulations when disconnecting and disposing of your old toilet.

Follow-up Steps to Remove Toilet

Now that you’re ready to tackle toilet removal let’s dive into the follow-up steps that will guide you through the process. These next five steps will help you disassemble the toilet and disconnect it from the plumbing system safely and efficiently.

Step 1: Get All Tools Required to Remove Toilet

Before you embark on the toilet removal process, you must have all the necessary tools and materials at your disposal. Gathering these items beforehand will help you work efficiently and avoid unnecessary interruptions. First, ensure you have an adjustable wrench, a screwdriver, a pair of pliers, and a putty knife. These tools will be instrumental in disconnecting the toilet from its plumbing connections and securing it back in place later. 

Prepare a bucket or a stack of towels to handle any potential water spillage, protecting your bathroom from damage. You should also acquire a new wax ring for resealing the toilet to the floor once you’re ready to reinstall it. It’s advisable to wear disposable gloves and safety goggles to safeguard your hands and eyes, especially when dealing with potential contaminants. 

Lastly, suppose the toilet’s nuts and bolts are rusty or difficult to remove. In that case, a penetrating lubricant like WD-40 can help ease this process. With all these tools and safety measures, you’ll be well-prepared for a smooth and efficient toilet removal.

Besides, get all the tools that you need to remove the toilet. These include a sponge, bucket, utility knife, wire brush, putty knife, wrenches, hacksaw, sockets, and rags. 

Step 2: Turn off the Water Supply

In the second step, turn off the water supply to your toilet. After that, flush out the toilet many times with the removal of standing water. Remove any extra water and dry out the tank and bowl. It is good to use a vacuum to remove extra water from the tank and bowl. 

Step 3: Removing the Tank From the Toilet Bowl and the Nuts

In this step, you have to remove the tank from the toilet bowl. It is time when you need to use a ratchet and wrench. Use any of these tools to remove the nuts from the tank. Then, place the tank on the rag and newspaper. 

After that, use a wrench to remove the nuts from the bolts present at the toilet base. In some bolts, trim caps are present. So, you have to remove the caps first. In case you can’t loosen the bolts using a wrench. Then, use the hacksaw to cut bolts. 

Step 4: Now Remove the Toilet from the Washroom Floor

Now, it is time to use a utility knife. Using this, you can cut the sealing that holds the toilet and floor. You also need to remove the wax rings and seal the toilet base to the floor. Shake the toilet to remove all the bonds. Now, lift the toilet and place it in the newspaper. 

Step 5: Lastly, Clean the Toilet Flange 

At last, you have to clean the toilet flange by removing the sealing wax. Do it quickly because the flange is linked to some gas pipes. After removing the wax sealing, use a brush to clean the flange. Then, place an old rag on the pipe opening. It is good to cover it with an inverted bucket until you install the new toilet. 

How do you disconnect a full toilet?

It is good to add a cup of baking soda to your toilet. Wait. Then, add two cups of vinegar to the toilet. Both these will react and start making bubbles. So, you should be careful while pouring water to avoid any overflow and splash. 

How do you move a toilet position?

Suppose you want to move your toilet just a few inches. Then, you need to remove the concrete to move the water and waste line. After that, build the concrete and replace the flooring. 

How do I turn the water off to my toilet with a screwdriver?

An isolation valve is present under your toilet. So, if you want to turn it off, you should use a flathead screwdriver. For turning off the water entry, give the slot a quarter turn in both directions. So, water will go across the pipe work. 


Clogging of toilet pots is a serious but common issue. Each home has this issue after some days if you are worried about clogging the toilet and having a bad smell for some days. Then, there is no need to worry because we have discussed some easy ways to solve this issue. It is good if you get help from a plumber. But if you don’t want to, you can do it yourself. 

Luckily, by applying the above-mentioned tricks, you don’t need to call a plumber, nor do you need to step out of your home. Use some already present things and unclog the toilet. Remember the success of these remedies based on the condition of the clogged pot. Maybe any of these will work alone. Maybe you have to try many ways at a time. So, don’t waste time and find out which way will work best!

Check Also

Soft Water vs Hard Water

Soft Water vs Hard Water

Hard water vs soft water should be a topic of considerable importance for you as ...

Leave a Reply

Your email address will not be published. Required fields are marked *